- Compatible with 3033R, 3038R, and 3045R Tractors
- Quik-Park™ mounting system for efficient attachment and removal
- Quik-Change™ attachment carrier makes it easier and faster to move from job to job
- 509 kg (1,122 lb.) lift capacity
Features
Quik-Park™ loader mounting system
Quik-Park loader mounting systemThe H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
Quik-change attachment carrier
Quik-change attachment carrierAllows fast, easy removal/mounting of attachments without tools.
End-of-pin lubrication means easy maintenance
Close up of grease fitting
Pivot point grease fitting locationsAll pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
Specifications
Key Specs
- Maximum lift height (A)
- 2616 mm
103.3 in.
- Lift capacity at full height
- Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf
- Boom breakout force
- Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf
- Bucket rollback force capacity
- At ground-level line (ZZ)
1335.4 kgf
2944 lbf
- Clearance at full height - bucket dumped (C)
- 2003 kgf
78.8 lbf
- Dump angle, degrees (E)
- 49.3 degree (angle)
- Rollback angle, degrees (G)
- 23.8 degree (angle)
Tractor
- Model
- 4105
- Front tire
- 10-16.5 6PR R4T1
- Rear tire
- 17.52-24 8PR R4T1
- Front axle configuration
- Wheelbase
- 1727 mm
68 in.
- Pump capacity
- 5.7 gpm
- Rated pressure
- 2500 psi
Loader
- Base weight
- 281.09 kg
- Leveling configuration
- Bucket used
- Materials
- Bucket weight
- 93.8 kg
207 lb
- Lift capacity at full height
- Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf
- Lift capacity at 59 in. (1500 mm)
- Measured at pivot (W)
959 kgf
2109 lbf
Measured at 500 mm ahead of pivot (X)
745 kgf
1639 lbf
- Boom breakout force
- Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf
- Bucket rollback force capacity
- At maximum height (VV)
822 kgf
1819 lbf
At 59-in. (1500-mm) lift height (XX)
1397 kgf
3079 lbf
At ground-level line (ZZ)
1335.4 kgf
2944 lbf
- Dimensions
- Maximum lift height (A)
2616 mm
103.3 in.
At full height - bucket level(B)
2411 mm
94.9 in.
At full height - bucket dumped (C)
2003 mm
78.8 in.
- Overall length (I+F), ft (m)
- 3.218 m
10.55 ft
- Overall height in carry position (J)
- Digging depth (H)
- 121 mm
4.76 in.
- Reach
- At maximum height (D)
766 mm
30.1 in.
At ground level - bucket level (F)
1491 mm
50.7 in.
- Bucket angle
- Dump angle, degrees (E)
49.3 degree (angle)
Rollback angle, degrees (G)
23.8 degree (angle)
Dump angle, ground
138 degree (angle)
- Cycle times
- Loader raise, seconds
3.6 seconds
Loader lower, seconds
2.1 seconds
Bucket dump, seconds
3.0 / 1.2 (with regen) seconds
Bucket rollback, seconds
1.8 seconds
Additional Information
We have a range of finance options to suit any customer. Contact your local Emmetts branch, or visit these sites for more information and a free quote.
